Options

ESL Series Electronic Safe Locks

AMSEC has been a pioneer in the electronic lock market. The new ESL series locks offer unrivaled value in electronic safe access. The ESL10 and ESL20 lokcs have the best blend of features and funtion in Electronic Safe Locks. The ESL10 is a basic keypad lock for home and office applications. The ESL 20 Offers advanced features necessary for commercial applications.

ESL10 Features:

ESL20 Additional Features:

Replaces most mechanical combination locks. Easy installation and operation

Time Delay Mode: Delays can be set from 1 to 99 minutes. Open period can be set from 1 to 9 minutes

Combination changes are fast and easy from the keypad.

Multiple User Mode: When enabled, 1 master code and 8 user codes are available with full supervsory control and code management.

Factory Reset Combination for solving lost combinations without requiring expensive service calls.

Dual Control Mode: When enabled, the lock requires two combinations to open for added security.

Two 9VDC battery in the keypad housing can be changed easily.

Armored Car Override: When enabled, allows an armored car service to bypass Time Delay.

Electronics are in the lock and sealed to prevent possible moisture related failures.

External A/C power: Provides power for unlimited use with battery power as backup.

Cable fits through a 1/2" spindle hole without cutting and re-crimping connector.

Control Port: Turn the ESL20 on/off with an Access Manager, Alarm System or other device.

Audible Beep and Flash from every keystroke gives maximum feedback to the user.

Optional Expansion Modules

New industrial "Soft Touch" membrane keypad is tough yet requires very low activation pressure.

Provides these additional capabilities on the ESL20:

15 minute Penalty Lockout after incorrect entries protects against manipulation attempts.

Duress (Silent Signal) Alarm Output. Provides relay output for alarm system connection.

New patented dead-latched lock design with an internal relock device for maximum security.

External connection for A/C power transformer.

Lock "auto-locks" when boltwork is thrown to prevent safes from being left in a "daylock" position

External Connection for control port.

Optional internal battery pack extends operation between battery changes.

Provides for connection of one or two ESL20 locks.

Slam Bolt version for locker applications.

INSTALLED OPTIONS / RETROFIT KITS

Model Number

Description

Primary Lock

Aux. Lock

Retrofit Kit

Part No.*

Part No. **

Part No.

ESL10

ESL10 Standard Lock

4505317

4505317A

0615226

ESL10S

ESL10 Slam Bolt Lock

4505318

4505318A

0615227

ESL20

ESL20 Standard Lock

4505319

4505319A

0615228

ESL20S

ESL20 Slam Bolt Lock

4505320

4505320A

0615229

ESLBAT

Auxillary Battery Pack for

ESL10 or ESL20

4505321

0615230

ESL20EXP1

Expansion Module Kit for 1

ESL20 Lock

4505322

0615231

ESL20EXP2

Expansion Module Kit for 2

ESL20 Locks.

4505323

0615232

ESL20EXP3

Expansion Kit, Duress Only

4505350

0615312

ESLAC

A/C Power Kit for ESL20

4505324

0615233

ESLTFMR

A/C Transformer For ESL20EXP 1/2

4505325

0635080

* Lock factory installed in place of the standard mechanical Combination Lock, Dial and Dial Ring.

**Lock factory installed as an Auxillary Lock, includes all mount pads and hardware for installation.

U.L. Listed Dual Nose Key Lock

Spyproof Dial

Dual control safe deposit lock requires two different keys to operate safe.

Restricts unauthorized viewing while dialing combination. Also available with key locking feature.

U.L. High Secuirty Key Lock

Modular Alarm System

European style 9 lever changeable key lock offers exceptional security features for use on inner locker or outer safe doors.

Detects vibration,heat and door openings. Heat indicator activates alarm when torch attack occurs. Internal magnetic door contact detects door opening. Internal vibration sensor activates alarm if safe is moved or during drill attack

U.L. Listed Key Op Lock

144 Hour Time Lock

European style 7 lever changeable key lock offers exceptional security features for use on inner locker or outer safe doors.

Safes equipped with Time locks offer the capability of locking the safe for a preselected period of time. Time periods range from 1 hour to 144 hours (6 full days)

Key Locking Front Read Dial

Interior Drawers

Key is used to lock dial in fixed position and affords dual custody control. Manager has the combination, collector has the key. Both must be present to unlock the safe.

All drawers are commercial quality have steel construction. Available in legal, letter and document sizes. Each is furnished with handle and key lock. All drawer capacities are 150lbs. and come with a heavy duty latch removable ball bearing suspension.

Interior Lockers

Interior/Exterior Hopper

AMSEC offers a wide variety of standard interior locker compartments to fit your needs. Standard lockers are constructed of 10ga. or 1/4 inch solid steel. Options include slotted doors, combination locks and high security key locks.

Available in three different package sizes ranging from 5-3/4" deep x 3-1/2" wide x 8-3/4" long to 7" deep x 4-1/2" wide x 10-3/4" long. Hoppers can be installed on the interior or exterior of plate, clad or composite safes.

Locking Bolt Detent

Slotted Doors

Keeps locking bolts retracted when door is in open position. Prevents damage to safe body and boltwork mechanism caused by accidental door closure with bolts extended.

Slotted doors are also available on freestanding plate safes, freestanding clad, composite chests, interior lockers, and interior drawers. Note: Safes with slotted doors are not recommended for overnight storage.