Door Closers

Standard Duty - Surface Mounted

• Non-handed for regular, top jamb and parallel arm mount applications.
• Two non-critical adjusting valves (sweep and latch) work to provide consistent closing speeds through a wide range of temperatures.
• Finishes: Aluminum (689) AL, Dark Bronze (690) DBZ, Light Bronze (691) LBZ, Gold (696) GL and Black (693) BLK.
• 10-year warranty.

Heavy Duty - Surface Mounted

• Suitable for high–traffic doors
•  Heavy–duty cast iron body and forged steel arms.
• Comes in two finishes, Dark Bronze and Aluminum
• Optional drop plates allow for installation in any situation.
• 25–year warranty, one of the best in the industry.
• Superior door control.

Conceiled - International Style

• ADA multi sized closer with Adjustable Spring Power for a range of sizes from 8 1/2 lbs. of Opening force to medium spring tension.
• Barrier Free operation to comply with ANSI A117.1
• UL Fire Label UL10C and UBC7.2 for fire safety
• Positive backstop and hold open at 90 or 105 degree.
• Two adjustment valves control closing speed and latching speed
• Offset or side load arm
• Stable hydraulic door check fluid for any climatic operation and constant lubrication.

Conceiled - Husky Style

• Rebuilt only
• retrofits existing Kawneer closers
• 1 year warranty

Conceiled - Floor Mounted

• Floor closers are fully concealed to maintain aesthetic design of the opening.
• Full weight of door is borne by floor closer, providing trouble-free operation and long life.
• Doors up to 1,500 pounds are accommodated, allowing standard and heavy doors in a building to be hung by the same means.
• Available offset or center hung to accommodate any installation.
• Vertical adjustment provides for field adjustment of the door if required.
• Specification of heavy panels on the door face with standard offset floor closer preparation available.
• Full floor-to-ceiling concealment is offered for center hung doors, providing almost unlimited design flexibility.
• Extended spindles available to accommodate any floor condition.
• Offset models available 3/4" or 1-1/2" offset.
• Offset models available for lead-lined doors.
• Offset models available for fire door assemblies up to three hours.
• Spring tension and closing speed are field adjustable.
• Built-in fully adjustable hydraulic backcheck standard on 27 and 28.
• Available in all standard architectural finishes.

Auto Door Openers

• C-UL US listed for use on fire and smoke barrier doors
• 2-year warranty
• Meets requirements for Americans with Disabilities Act (ADA)
• ANSI/BHMA A156.19 certified
• Meets ANSI/BHMA A156.4 requirements
• Ease of installation and setup
• Simple instructions
• Application versatility and ease of adjustment Push or pull side mounting units available
• Operates as mechanical surface closer during close cycles, when door is opened manually or if power is turned off
• Quiet operation
• Spring force provides the feel of a normal manual door closer
• Door can be opened manually if desired
• Adjustable Spring Power
• Backcheck Valve
• Sweep Valve & Latch Valve
• Non-Handed
• End-User On/Off Switch
• Hold Open options:
     – 0-30 seconds (5 seconds minimum required for ADA and ANSI/BHMA A156.19)
• Obstruction Detection:
     – Motor stops if door is obstructed during an opening
     – Door closes under manual spring force (not to exceed 15 lb force)
• Power Input: 120 VAC, 60Hz connects to wall outlet
• Current Draw: .6A
• Relay Output: DPDT
• Normally Open/Normally Closed (jumper)
     – For electric strike function